Professional studio headphones serve a rather different purpose from the models most consumers use for everyday listening. Rather than making music sound more exciting, their job is to reveal what is actually present in a recording.
Slovenian manufacturer OLLO Audio has announced the OLLO Audio X2, a new pair of open-back studio reference headphones aimed at audio engineers, producers and mixing professionals who need a consistent, neutral listening experience.
Building on the company’s X1 headphones, the X2 introduces a new 50 mm beryllium-coated driver, updated unit-specific calibration software and improvements to its construction.
However, perhaps the most interesting aspect of the X2 is OLLO’s approach to calibration and repairability.
Individual Calibration for More Accurate Monitoring
One of the challenges of professional headphone monitoring is manufacturing variation.
Even two pairs of headphones from the same production line can exhibit slightly different frequency responses. For a mixing engineer making fine adjustments to equalisation or compression, those variations can affect critical listening decisions.
OLLO Audio addresses this through its Unit Specific Calibration (USC) system.
Every X2 is individually measured during production, with its calibration data supplied to the owner.
The information can be used with OLLO’s included USC plugin, compatible third-party audio software or digital signal processing hardware.
Importantly, the calibration information is provided in an open, human-readable format rather than being restricted to a proprietary application.
This gives users greater flexibility over how they integrate the headphones into an existing studio workflow.
OLLO says the system helps reduce frequency-response variations and allows engineers to make more consistent mixing decisions.
The company positions the X2 as a tool capable of revealing adjustments as small as 1 dB, although the practical benefits of that claimed precision would need to be assessed through independent testing.
Beryllium-Coated Drivers Designed for Detail
The X2 uses a 50 mm dynamic driver with a beryllium-coated PET and polyurethane membrane.
Beryllium is valued in audio engineering for its stiffness relative to its weight, making it an attractive material for driver construction.
OLLO says the new membrane provides improved transient response, allowing the headphones to reproduce subtle changes in dynamics and timing more accurately.
These characteristics are particularly relevant when working with percussion, compression and other elements where small adjustments can influence the finished recording.
The X2 has a claimed frequency response of 8 Hz to 22 kHz and a nominal impedance of 32 ohms.
While the relatively low impedance should make the headphones suitable for a broad range of audio interfaces and playback devices, professional monitoring performance still depends on the quality of the source equipment and available output power.
As an open-back design, the X2 is intended primarily for controlled listening environments rather than commuting or noisy offices.
Designed to Be Repaired, Not Replaced
The X2 also takes a notably practical approach to long-term ownership.
OLLO Audio says every major component is available as a replacement part, including the drivers, ear pads, headband, detachable cables and American walnut housings.
The headphones are designed to be serviced at home, avoiding construction methods that make routine repairs unnecessarily difficult.
For professional users who rely on their headphones every day, replaceable components could significantly extend the useful life of the equipment.
This is a welcome approach in an industry where non-replaceable batteries, adhesives and proprietary components can make otherwise functional audio products difficult or uneconomical to repair.
The X2 combines American walnut earcups with a stainless steel and silicone headband, acoustic foam ear pads and detachable cables.
OLLO backs the headphones with a five-year limited warranty.
OLLO Audio X2 Technical Specifications
| Feature | Specification |
|---|---|
| Design | Open-back, over-ear |
| Driver | 50 mm dynamic, neodymium magnet |
| Diaphragm | Beryllium-coated PET and polyurethane |
| Frequency response | 8 Hz – 22 kHz (manufacturer measurement) |
| Impedance | 32 ohms |
| Sensitivity | 108 dB SPL at 0 dBu input |
| Distortion | Claimed THD below 0.157% at 85 dB SPL, 1 kHz |
| Housing | American walnut |
| Headband | Stainless steel and silicone |
| Calibration | Individual USC measurement and calibration data |
| Cable | Detachable, user-replaceable |
| Warranty | Five-year limited |
| Manufacturing | Hand-built in Slovenia |
Australian Pricing and Availability
The OLLO Audio X2 was officially launched on 3 November 2026.
The first production batch is limited to 100 units, with shipments scheduled to begin on 7 December 2026.
Australian specialist retailer Koala Audio lists the X2 at A$869 including GST, with pre-orders available.
International pricing starts at US$499 for export markets, excluding applicable taxes and duties.
More information is available from the OLLO Audio website.
For professional users, the appeal of the X2 goes beyond its driver technology.
Individual calibration, portable correction data and a design intended for long-term servicing address some practical challenges associated with using headphones as precision monitoring tools.

