The Sony Alpha 7R VI is the sixth generation of their celebrated Alpha 7R series.
Built on the series’ legacy of leading resolution, this full-frame mirrorless camera pairs an approximately 66.8 effective megapixel back-illuminated fully-stacked Exmor RS CMOS sensor with the new BIONZ XR2 engine.
The result is exceptional resolution, accurate colour, and reliable performance across subjects ranging from people in motion to wildlife to expansive landscapes.
Sony Alpha 7R VI Delivers 66.8MP Full-Frame Resolution
Expanded High-Resolution Shooting
- 66.8 MP (approximate, effective) full-frame fully-stacked Exmor RS sensor with up to 16 stops of dynamic range and reduced noise in the mid-sensitivity range
- Precise 5-axis optical image stabilisation delivering up to 8.5 stops at the centre and 7.0 stops at the periphery
- Auto White Balance powered by visible light and infrared (IR) sensor and deep-learning illumination estimation, for stable natural colour in shaded or indoor scenes
Intelligence in Every Frame with High-Speed, High-Precision Continuous Shooting
- BIONZ XR2 engine with integrated AI processing unit and approximately 5.6x faster sensor readout than the previous model4, enabling blackout-free continuous shooting at up to approximately 30 fps5 delivering up to 60 AF/AE calculations per second with AF/AE tracking
- Real-time Recognition AF+ (Plus) with skeletal-based human pose estimation and tracking, for reliable focus on fast-moving subjects including athletes and dynamic scenes
Built for Professional Demands
- New NP-SA100 high-capacity battery (2670 mAh) supports up to 710 still images via LCD monitor or 600 via viewfinder (CIPA standard), reducing battery changes during extended shoots
- Approximately 9.44M dot OLED viewfinder with a DCI-P3 equivalent colour gamut and 10-bit HDR—maximum brightness is approximately three times higher than conventional models for clear visibility in bright environments
- Effective heat management allows uninterrupted 8K movie recording up to 120 min
- Dual USB Type-C ports for simultaneous charging and data transfer; illuminated rear buttons for low-light operation
- Magnesium alloy for a lightweight and durable body; 4-axis multi-angle LCD monitor for flexible shooting angles; mode-dial “Memory Recall” links shooting setups to customisable buttons
- Supports Sony’s Camera Authenticity Solution, including the C2PA standard, enabling verification that still images and videos were captured with a camera (not AI-generated)
Professional Video
- 8K 30p recording with 8.2K oversampling9 and full frame 4K 60p and 120p recording without crop
- Dual Gain Shooting, a first in the Alpha series11, optimises sensor performance to reduce noise losing shadow detail for smooth gradation and wide latitude
- Redesigned in-camera stabilisation expands the roll-direction compensation range by 2×5; Dynamic active Mode delivers smooth and steady handheld
- 32-bit float audio internal recording in camera when paired with the XLR-A4 XLR adaptor, eliminating the need for fine adjustment on location
Sony also introduces the XLR-A4 XLR adaptor to expand on-camera audio capabilities for professional productions, including 32-bit float recording.
Key Features of the XLR-A4 XLR Adaptor
- Supports in-camera digital audio recording with up to 4-channel; XLR microphones, such as the ECM-778 (up to 2ch), and connects 3.5 mm stereo mini jack microphones (2ch stereo) via the Multi Interface (MI) Shoe
- Dual AD converters digitise microphone signals across a wide dynamic range, capturing quiet ambience through loud action with clarity
- Records digital audio at up to 96kHz 32-bit float 4ch on compatible cameras, fully leveraging high-end XLR microphone quality. The 32-bit float format eliminates the need for fine gain adjustment on location, significantly reducing the risk of audio distortion
- Lower profile height design and a reinforced chassis structure compared to the XLR-K3M, supporting stable shooting across on-location scenarios
- Supplied shoe audio extension cable allows placement up to approximately 60 cm from the camera; side routing minimises interference with rigs and accessories
- USB Audio Class 2.0 compatible; functions as a 96 kHz 24-bit 2ch audio interface when connected to a PC for on-site audio monitoring and editing
Optional accessories for Alpha 7R VI (sold separately)
- Rechargeable Battery Pack NP-SA100: High-capacity battery with InfoLITHIUM functionality, delivering approximately 1.3x the power capacity of the NP-FZ100 Z-series battery. Integrates with camera power management to optimise endurance and thermal behaviour. Includes an in-camera battery deterioration indicator.
- Vertical Grip VG-C6: Ergonomic grip for comfortable vertical or horizontal shooting, housing up to two high-capacity SA-series batteries. Dust and moisture resistant construction, equivalent to the camera body.
- Battery Charger BC-SAD1: Dedicated charger for the SA-type battery NP-SA100. With a USB Power Delivery source of 45 W or higher15, charges two batteries simultaneously in approximately 115 minutes or one battery to 80% in approximately 55 minutes and full charge in approximately 85 minutes. Displays battery pack deterioration status during charging.
- DC Coupler DC-C2 Provides stable continuous power via an external USB Power Delivery source of 100 W or higher a USB-C to USB-C cable
Australian Pricing and Availability
Alpha 7R VI (ILCE-7RM6) | SRP A$6,999.00 | Available in Australia from May 2026
Accessories will be available in Australia from early June 2026
- XLR-A4 | SRP A$1,099.00
- Rechargeable Battery Pack, NP-SA100 | SRP A$189.00
- Vertical Grip, VG-C6 | SRP A$699.00
- Battery Charger, BC-SAD1 | SRP A$219.00
- DC Coupler, DC-C2 | SRP A$219.00
