There is apparently still room to make vacuum cleaners more complicated — or, depending on your perspective, require considerably less effort from the person holding them.

Tineco has arrived at IFA 2026 under the banner “The Future Cleans Itself”, unveiling five new floor and carpet cleaning products built around increasingly automated cleaning and maintenance.

Leading the charge is the Tineco FLOOR ONE S11 Artist Fusion Steam, which the company claims is the first floor washer to combine 230°C hot steam with heated mopping.

But Tineco’s announcements stretch beyond simply throwing more heat at whatever has become welded to the kitchen floor. The new range includes automatic hot-water refilling, high-pressure stain treatment, automated self-cleaning and drying, and even a cordless vacuum station capable of sealing and replacing its own dust bag.

FLOOR ONE S11 Artist Fusion Steam turns up the heat

The headline product is the FLOOR ONE S11 Artist Fusion Steam, combining Tineco’s 230°C HyperSteam system with what it calls HeatBoost Mopping.

The idea is to attack stubborn dirt using both steam and direct heated mopping, while ReverseScrub technology works at tougher grime when required.

Tineco claims up to 35,000 Pa suction and as much as 110 minutes of runtime, which is a substantial figure for a wet and dry floor cleaner if it translates into similar performance in real-world use.

Cleaning the cleaner has received some attention as well. The S11 supports dual steam self-cleaning through FlashDry and SilentDry, designed to clean and dry the brush and internal pathways after use.

FLOOR ONE S11 Artist Fusion Steam

FLOOR ONE S9 Artist Boost Steam gets its IFA debut

The FLOOR ONE S9 Artist Boost Steam isn’t technically brand new, but IFA 2026 marks its first live showcase at the show.

It uses 230°C BoostSteam alongside ReverseScrub, with Tineco claiming it can tackle stubborn dried-on mess within 30 seconds of activation.

There’s 25,000 Pa suction, while its 180-degree HyperStretch design allows the body to lie almost flat. At 13cm high in this position, it should be able to get underneath furniture that would stop a more conventional upright floor washer.

Afterwards, Tineco’s FlashDry system handles self-cleaning and drying.

Tineco FLOOR ONE S9 Artist Boost Steam

FLOOR ONE Station S9 Scientist refills itself

The FLOOR ONE Station S9 Scientist takes aim at another part of the floor-cleaning routine: filling the water tank.

Its docking station holds five litres of water and can automatically refill the floor washer with either cold water or water heated to 60°C.

Tineco has also added HydroBurst, which fires a 15-degree high-pressure water jet at stubborn stains before the machine picks up the resulting mess with up to 25,000 Pa of suction.

An iLoop Smart Sensor adjusts suction and water flow according to detected dirt levels, while the cleaner can lie flat to 180 degrees for reaching underneath furniture.

Once the cleaning is done, FlashDry can dry the brush and filter in five minutes, with a quieter SilentDry mode available when speed isn’t as important.

It’s another small step towards the increasingly obvious goal for this category: having the machine deal with as much of its own maintenance as possible.

Tineco FLOOR ONE S9 Scientist

PURE ONE STATION 7 ZeroTouch changes its own dust bag

Possibly the most intriguing bit of automation in Tineco’s IFA lineup isn’t attached to a wet floor cleaner at all.

The PURE ONE STATION 7 ZeroTouch is a cordless stick vacuum paired with what Tineco calls its ZeroTouch Intelligent Station.

Returning the vacuum to its dock triggers automatic dust management. The station empties the vacuum’s bin, seals the full dust bag and replaces it with another bag automatically, while also compacting the collected debris to make better use of the available capacity.

That could remove one of the less pleasant parts of owning a self-emptying vacuum — eventually having to deal with the thing it has been emptying everything into.

The vacuum itself delivers a claimed 350 AW of suction and up to 90 minutes of runtime, with Tineco positioning it for hard floors, carpets and pet hair.

PURE ONE STATION 7 ZeroTouch

CARPET ONE Steam takes HyperSteam onto carpet

Tineco hasn’t forgotten homes with carpet either.

The new CARPET ONE Steam applies the company’s HyperSteam technology to carpet cleaning, paired with 175 AW suction to extract dirty water from the fibres.

Its DrySense system is designed to reduce the amount of time carpets remain wet after cleaning, while an iLoop Smart Sensor automatically adjusts cleaning performance according to detected dirt levels.

There’s also an integrated steam self-cleaning system to deal with the machine once you’ve finished dealing with the carpet.

CARPET ONE Steam

Tineco wants the cleaner to do more of the cleaning

There is a common thread running through Tineco’s IFA 2026 announcements.

Raw suction figures are still getting bigger and steam is getting hotter, but increasingly the innovation is happening around all the jobs that surround the actual cleaning: filling tanks, attacking difficult stains, emptying dust, washing rollers and drying components afterwards.

A dock that automatically changes its own dust bag might sound like an absurd luxury until you’ve emptied enough vacuum bins and stations to appreciate why someone decided to engineer it.

Tineco says it has now been the world’s number one household wet and dry vacuum cleaner brand for four consecutive years, citing Euromonitor International global retail sales data covering 2022–2025.

The company traces its smart floor-washing push back to the FLOOR ONE S1 in 2020, and its IFA 2026 lineup suggests the next battleground isn’t simply how well these machines clean.

It’s how little they need you once they’re finished.

Tineco is exhibiting the new range at IFA 2026 in Berlin from September 4–8, at Hall 9, Booth H9 113.

Australian pricing and availability for the newly announced models have not been confirmed in the supplied announcement.