Guess which home appliance has passed our review desks more than any other product we pontificate about?
Could it be the humble vacuum cleaner?
I wouldn’t be surprised.
Personally, I have tested over a dozen products from Miele, Bissell, HiZero, and RoboMaid.
Tineco is a new brand for me, even though many of my colleagues have praised whatever Tineco model they had the pleasure of reviewing.
So, my expectations are high.
No wonder, because with its Ecovacs parentage, Tineco already has an important presence in many Aussie households.
Feel like inviting an artist into your home? Let’s unbox!
Like a contortion artist, this Floor One S7 Artist sat tightly packed in a rather business-like plain box.
No fancy retail packaging here, spruiking its features and specs in glorious detail.

A bit of click-and-assemble later, the black-and-grey-accented Artist stood on its feet, eh, foot.
I came across a brush roller and a small HEPA filter and was looking for where to fit them when I realised they were spares.
Well done, Tineco!
Next came the charging.
That’s where I discovered the voice prompts.
They can be muted or dialled down. But initially, I’d recommend leaving them on to hear what the machine is doing.
“Charging!” rang out loud and clear, accompanied by a pulsating green glow of that big 3D Light Display.
The aurora-like glow breathed three times, and after that, only the display on top of the handle indicated the charge level.

But that stayed on only for 5 minutes.
I was puzzled as to why there was no constant indication that the unit was still charging. You have to press a button to have the battery level come on again.
There was also no announcement when it was fully charged. The display ideally should indicate the level of charge all the time, not just when the machine is working.
The Artist at work: the test that matters in our household for the Tineco Floor One S7 Artist
Being a creative artist means you’re allowed to make a mess.
Creating is a messy business: wood chips fly, food splatters, paint drips and drops. And kids and animals are prime examples of sometimes VERY creative messiness!

This Artist, however, is created to clear and clean someone else’s mess.
We let this Artist loose in our kitchen, on the jarrah floors of the lounge and dining, as well as the tiles of the laundry and halls.
The amazing thing is that we did all that in about 20 minutes, having used exactly 50% of battery life and half a litre of water.
The claimed runtime of 50 minutes is realistic.
Before pressing the Start button, give the Tineco a drink
The Clean Water Tank (CWT) holds 1 litre of tap water. Then add 1 capful of the special formula that Tineco includes in the box.
Once you press the start button, you’ll discover that this Artist is self-propelled.
No more pushing and no effort pulling either.
The unit, with its iLoop Smart Sensor, knows how much suction or water to dispense according to how dirty the floor is.

The 3D indicator shows an angry red when it’s dirty and a calm blue when it is clean.
I noticed that sometimes it gets stuck on red, even though the area is well and truly clean.
A quick pause or change of mode (AUTO, Max or Suction) will get you back into the blue.
One of the features of this model is edge cleaning.
The roller is wide enough to reach the edge of floorboards.
The only proviso is that the overhanging cupboards are at least a good 9 cm off the floor. Mine were a bit tight in places, as you can see in this pic.

Going under furniture or beds is no sweat for this circus artist.
It can swivel and lay flat and still exert its strong 22,000 Pa suction power.
If it encounters hairballs in those dark recesses, the DualBlock anti-tangle technology helps keep hair from choking up the brush roll.
This is also where I would love to see some LED lights on the front to illuminate the debris field.
Some other models do have them, and it makes quite a difference.
Dividing the last cleaning job evenly: 10 minutes for the Tineco and 10 for me
You might think the Artist-in-residence does all the work, but there is some post-cleaning cleaning to do.
First up, I empty the DWT (you guessed it: the Dirty Water Tank).
Just look at what seemed to be a reasonably clean floor (at least to my male perception) will produce when a Tineco goes to work!

Yuk!
The next job is up to the machine: cleaning the brush roll.

By heating fresh water (make sure you have refilled the CWT again if needed), the machine dissolves stains from the pipe to the brush roller, and then uses 85℃ hot air to effectively dry every part of the S7 Artist.
They call it their Flashdry Self-Cleaning System.
It works a treat but is a bit noisy as it goes through the moves.
And this is the evidence the brush roll needed a hot bath.

Easy as.
Should you consider getting a Tineco Floor One S7 Artist Wet Dry Vacuum Cleaner?
My honest opinion is that this Tineco Floor One S7 Artist has earned its permanent residence in our appliance cabinet.
It has replaced a similar-functioning wet/dry vacuum from another brand, which has now been passed on to a family member.
This Tineco model has the edge in runtime, suction power and overall performance.
I think it is very well-designed and good-looking.
You’ll find it on Amazon, where it has just launched at the discounted price of A$579.
DRN would like to thank Tineco for allowing us to test this model.