There are not many products offered to DRN that make me want to hit the brakes, but routers are an exception. I had been using the same router for three years — practically a lifetime in the DRN world. It worked reliably with my rather specific network configuration, but its lack of IPv6 support was limiting my ability to integrate Matter devices into Home Assistant.

When I was offered the ExpressVPN Fortify for review, I had questions.

Replacing my router was never going to be as simple as plugging in something newer and faster. Whatever came next had to replicate my existing configuration without forcing me to spend days rebuilding the network around it. That would be the technological equivalent of the tail wagging the dog.

A router sits at the centre of everything connected in my home: computers, phones, televisions, smart-home devices, review products and DRN resources. Changing it could mean updating dozens of devices, integrations and firewall rules.

 

The ExpressVPN Fortify router

The ExpressVPN Fortify is an interesting hybrid.

Its hardware model is the GL-MT6000, combining GL.iNet’s established router hardware and networking platform with ExpressVPN’s VPN and privacy services.

Underneath the Fortify branding is the same hardware platform as GL.iNet’s Flint 2. It offers dual-band AX6000 Wi-Fi 6 connectivity, powered by a quad-core 2.0GHz processor, 1GB of DDR4 memory and 8GB of eMMC storage.

Wired networking is also well catered for, with two 2.5GbE ports and four Gigabit Ethernet ports. That provides welcome headroom for a faster internet connection, network-attached storage or other devices capable of exceeding Gigabit speeds.

On the software side, Fortify is based on OpenWrt, giving it considerably more flexibility than the average consumer router. For the uninitiated, OpenWrt is widely regarded as the gold standard for open-source router operating systems.

Rather than locking the hardware into a tightly controlled collection of features, OpenWrt lets the router adapt to your network instead of forcing the network to adapt to it.

Fortify is the first product from what ExpressVPN and GL.iNet describe as a longer-term co-branded router partnership.

ExpressVPN GLinet Fortify - Front View

More than a basic router

You could simply plug in Fortify and use it as a conventional Wi-Fi router. It would work perfectly well in that role.

It offers Wi-Fi 6 without making grand promises about mesh networking, Wi-Fi 7 or whatever comes next. But using it as a basic router would leave much of its capability untapped.

Fortify combines OpenWrt’s configurability with a more approachable GL.iNet interface, so you do not need to dive straight into its deepest settings.

It immediately addressed my biggest concern by allowing three separate network groups, each with its own dedicated and customisable subnet. This has been a dealbreaker for me with many other routers.

Separating devices into different subnets keeps trusted computers and network resources away from less trusted hardware. Smart-home and review devices can access the internet without automatically being given free rein across the rest of my network, while guests only receive the access they need.

Before anyone comes at me with pitchforks, there is a distinction between wireless networks, SSIDs and subnets.

Fortify provides three main network groups:

  • Main
  • Guest
  • IoT

Each can have separate SSIDs for the 2.4GHz and 5GHz bands, giving you up to six Wi-Fi network names across three IP subnets.

The SSIDs can be configured with different security, transmit power, wireless protocols, channel widths and channels. I can run my main network at maximum power while reducing the guest network so friends cannot sit out on the street leeching off my internet.

More practically, this also accommodates older or fussier smart-home devices. Some of mine refused to connect when I streamlined the enabled Wi-Fi protocols, so I configured the 2.4GHz network for the compatibility they required without compromising the settings used by newer devices.

ExpressVPN GLinet Fortify - Main UI

Moving my existing network

The transition was not as difficult as I had feared.

I recreated my existing SSIDs and subnets on Fortify, allowing most devices to reconnect without being individually reconfigured. Once those networks were established, much of the household simply carried on as before.

The three networks remained properly isolated, although I needed to troubleshoot the firewall rules to ensure the right traffic could cross between them. That matters when a trusted device or Home Assistant needs to communicate with something on the IoT network without opening unrestricted access in the opposite direction.

Most importantly, Fortify gave me the local IPv6 support missing from my previous router, removing one of the obstacles to integrating Matter devices into Home Assistant. Matter relies on IPv6 within the local network; it does not require an IPv6 internet connection.

It still required planning and some troubleshooting, but the migration did not turn into the multi-day network rebuild I had feared.

Wi-Fi performance and coverage

To test local Wi-Fi performance without my internet connection becoming the bottleneck, I ran iPerf3 between a UGREEN NAS connected to the Fortify over 2.5GbE and a laptop equipped with an Intel Wi-Fi 7 BE200 320MHz wireless adapter.

Although the laptop supports Wi-Fi 7, the Fortify is a Wi-Fi 6 router, so the connection operated using Wi-Fi 6.

I conducted three 30-second tests in each direction at every location, using four simultaneous data streams. The figures below are the median results.

Test location NAS to laptop Laptop to NAS
Direct line of sight 1.24Gbps 1.18Gbps
Desk, one room away 769Mbps 264Mbps
Front of garage, through several exterior walls 304Mbps 26.6Mbps
Back of garage No connection No connection

With a direct line of sight to the Fortify, throughput comfortably exceeded 1Gbps in both directions, reaching a median of 1.24Gbps from the NAS to the laptop and 1.18Gbps in the opposite direction.

At my desk, one room away from the router, download-direction throughput remained strong at 769Mbps. Performance in the opposite direction dropped to 264Mbps, but that was still more than adequate for normal internet use, large file transfers and accessing resources on the NAS.

The toughest test was from the front of the garage, with the signal passing through several exterior walls. The Fortify still delivered 304Mbps to the laptop, although throughput back to the router fell substantially to 26.6Mbps.

The difference between the two directions demonstrates that Wi-Fi performance depends on the entire link, not just the router. The Fortify’s radios and antennas may be able to transmit a strong signal over distance, but the laptop’s transmit power and antenna arrangement can limit performance in the opposite direction.

There was no usable connection at the back of the garage, which was expected given the distance and additional walls involved. Covering that area properly requires another access point, which I disabled for the purpose of this test.

Overall, the Fortify delivered excellent short-range performance, remained fast from the next room and provided useful coverage at the edge of my property. For a standalone Wi-Fi 6 router without a mesh satellite, that is a strong result.

ExpressVPN GLinet Fortify - Clients UI

Multi-WAN and mobile failover

Fortify also supports multiple internet connections. It can distribute traffic between them in load-balancing mode or keep a secondary connection ready for failover if the primary service goes down.

For anyone working from home, running network services or living with unreliable broadband, that redundancy can be more valuable than another theoretical increase in Wi-Fi speed.

If you are worried someone might cut your cable — or an NBN outage takes care of it for them — you can also connect a compatible USB 4G or 5G modem.

Most households will not need every option. What matters is that Fortify leaves them available.

ExpressVPN integration

Fortify includes a 12-month ExpressVPN Advanced plan. For me, this is where the router truly distinguishes itself.

Traditional VPN use often feels binary: it is either on or off. Enable it and all traffic passes through the VPN unless you configure split tunnelling, which is generally managed per application on individual devices.

Fortify moves that decision to the router and provides considerably more control.

You can create a tunnel to a particular ExpressVPN endpoint and apply it to:

  • All clients connected to the router
  • A connection type or network, such as LAN, Guest or IoT
  • Specific devices
  • Every device except those you nominate

You can then send all destinations, nominated domains or everything except nominated domains through that tunnel.

In principle, you could route the domains used by ESPN through a US endpoint while allowing Australian Netflix traffic from the same television to connect directly. If you wanted UK Netflix as well, you could create another tunnel through a UK endpoint. Both can remain active while everyone else continues using the internet normally.

Some services use multiple domains and content-delivery networks, so the necessary routing rules may require experimentation. The important point is that the controls exist at router level, including for televisions, game consoles and other devices that may not support their own VPN applications.

You are not locked into ExpressVPN either. Fortify can use other OpenVPN and WireGuard services, as well as run its own OpenVPN or WireGuard server.

ExpressVPN GLinet Fortify - ExpressVPN UI

Other applications

Numerous additional applications and services can run on Fortify. The most important one for me is Tailscale.

Tailscale creates a private network between authorised devices in different locations. Fortify can advertise my home LAN to that network, giving me secure remote access to DRN resources stored at home. With supported firmware, the router can also operate as an exit node, allowing a remote device’s internet traffic to leave through my home connection.

Having a Tailscale exit node at home was one reason I retained full internet access while travelling in China earlier this year. I also had a private route home and could reach DRN resources stored there.

Running these functions on Fortify removes the need to leave another computer or server operating solely for Tailscale. However, GL.iNet labels its Tailscale implementation as beta and warns that using it alongside another VPN client can cause routing conflicts.

Parental controls are available through OpenWrt or, in supported countries, Bark. The built-in controls are relatively basic, but that may be enough for households that only need website blocking and access schedules.

Experienced users can also manage Fortify through LuCI, OpenWrt’s default web interface. This exposes advanced settings, plug-ins and functions that are not available through the regular GL.iNet interface.

Home Assistant integration

Fortify can be integrated with Home Assistant, although it is far from plug-and-play.

I needed to access LuCI and install the required OpenWrt RPC components before Home Assistant could communicate with it. The legacy OpenWrt ubus integration can then report when wireless clients connect or disconnect, allowing them to be used for presence detection and automations.

It works, but anyone buying Fortify specifically for Home Assistant should expect manual configuration rather than a polished integration wizard.

ExpressVPN GLinet Fortify - LuCI UI

What I didn’t like

There is a tremendous amount of functionality inside Fortify, but finding it can require exploration. Some features sit inside GL.iNet’s approachable interface, while others require a trip into LuCI.

One issue that stood out was the client list. Many connected devices appeared as unknown or unidentified, but I could not find an option in the standard interface to assign recognisable names.

When you have dozens of computers, phones, smart-home products and temporary review devices, a list of unidentified MAC addresses is not especially useful. Naming them would make it easier to understand what is connected, create device-specific VPN policies and spot anything that should not be there.

OpenWrt’s extensibility can also be overwhelming. Fortify presents page after page of downloadable plug-ins, covering everything from useful network utilities to services most owners will never recognise, let alone install.

That captures Fortify’s central trade-off. It works as a straightforward Wi-Fi router, but its greatest strengths are aimed at people willing to spend time understanding and configuring their network.

ExpressVPN GLinet Fortify - Rear View

Verdict

The ExpressVPN Fortify passed the most important test: it adapted to my network rather than forcing me to rebuild the network around it.

It may lack the headline appeal of Wi-Fi 7 or an elaborate mesh system, but separate subnets, configurable wireless networks, multi-WAN support, IPv6, Tailscale, OpenWrt and flexible VPN routing make a meaningful difference.

The ExpressVPN integration is the standout feature. Routing particular devices or destinations through different VPN endpoints while leaving everything else untouched makes a router-based VPN considerably more practical.

Fortify is not flawless. Its configurability requires exploration, the client list needs better device identification and some advanced features send you into LuCI. This is also more router than many households need.

For privacy-conscious users, frequent travellers, home-network enthusiasts or anyone wanting granular control without building an OpenWrt router from scratch, however, Fortify is a very capable package.

ExpressVPN provided an Australian RRP of A$289.99. That is highly competitive for this hardware and functionality, particularly with a 12-month ExpressVPN Advanced subscription included.

After three years with the same router, I was reluctant to make a change. Fortify gave me enough control to do it without turning the rest of my network upside down.

That is exactly what I needed it to do.

The ExpressVPN Fortify earns the DRN Pulse Award. It combines excellent hardware, strong Wi-Fi 6 performance and unusually flexible network and VPN controls in a package that remains approachable enough to use as an everyday router.

More importantly, it adapted to my network rather than demanding that I adapt my network to it. That is what turns Fortify from a capable router into an excellent one.

DRN would like to thank ExpressVPN for providing the review unit.

DRN Pulse Award